Welcome To Red Kite

Pipe Severance:
Can We Cut Your Pipe?

Red Kite Oilfield Services pipe cutting, and perforating capability can solve your challenges for your workover, well intervention, drilling and P&A operations. Our tools provide clean cuts and perforations with zero deformation to the pipe, eliminating remedial operations to “dress” the cut pipe.

USE OUR CALCuLATOR
Non-Explosive Perforation

Radial Cutting
Torch Specialists

The Red Kite team have years of experience in planning and executing pipe severance operations involving the MCR Technology. We have conducted operations utilising the Radial Cutting Torch™ cutting coil tubing to large casing. Our team also has experience in the successful planning and execution of operations for eroding and removing stuck and/or broken flapper valves in Sub Surface Safety Valves, creating major savings for customers OPEX

Of course, when stuck pipe problems occur, you need to resolve this situation quickly. Red Kite have the capability to solve specific stuck-pipe problems safer and more economically.

FIND OUT MORE
Operating Internationally

Serving the Global
Oil & Gas Industry

The Red Kite team has worked with clients in the UK and across the globe providing pipe cutting and perforating expertise. Red Kite provides the industry renowned MCR Oil Tools Radial Cutting Torch (RCT) technology. With this non-explosive and non-hazmat technology we can deploy our tools quickly and efficiently globally within hours on passenger aircraft with no restrictions, this allows Red Kite to distribute the required tools quickly and efficiently globally at short notice. Red Kite provide these services in the UK, Scandinavia, Europe, Africa, Middle East and Australasia.

Our trained personnel provide high quality customer service synonymous with Red Kite’s ethos.

FIND OUT MORE

Our Solutions

VIEW OUR SOLUTIONS

We specialise in non-explosive pipe recovery and products to the oil and gas industry. We supply a wide range of tools and equipment that have been tested and certified for international use under a varied selection of criteria.

Red Kite has over 150 years of experience in pipe severance, perforating, in the drilling, completions, work-over and P&A market segments, we have solutions to achieve your well objectives and overcome any issues in a safe and cost effective manner.

Stuck Coil Tubing

Red Kite has experience in perforating and cutting stuck coil tubing in our client’s wells. The equipment utilised is non-explosive and non-hazmat.

FIND OUT MORE
Cut to Release Packers

It's often necessary to utilise Radial Cutting Torches (RCT) to sever the inner mandrel of the completion packer to enable it to unset.

FIND OUT MORE
Cutting & Perforating Completions

The RCT is a versatile tool and can be used in a large variety of situations to cut tubing from 1-1/4” OD CT up to 9-7/8” casing.

FIND OUT MORE
Perforating and Cutting HWDP

The PostLatch™ system allows the ability to run small diameter tools (2.0” and 2.5” OD for example) to make consecutive cuts in the same plane resulting in a clean, non-deforming cut Heavy Weight Drill Pipe (HWDP).

FIND OUT MORE
Removing Broken/Loose Flapper Valves

Do you have a broken/loose flapper in your SSSV? Red Kite can offer MCR’s Axial Pyro Torch™ (APT). We have experience in eroding the flapper valves to allow entry into your well. The APT is a thermite-based system used to direct a plasma output (downward) upon tool initiation. The Axial Pyro Torch™ consists of three separate body sections.

FIND OUT MORE
Plug and Abandon Solutions

• Reducing operational rig time by combing different runs in the well, for example, set plug, perforate and cut tubing in one run.
•Perforating completion tubing and casing for circulation purposes
• Cutting casings up to 9-7/8”

FIND OUT MORE

About Red Kite

Red Kite Oilfield Services was first registered in December 3rd 2018, it is made up of enthusiastic personnel who are driven to provide best in class customer service and operational execution in the pipe severance and perforating business in the oil and gas industry. The name Red Kite came about when the owner and founder was driving in the North East of Scotland and saw that the Red Kite was being re-introduced to the Aberdeenshire area.  This was coincidental as we were looking at re-introducing the pipe cutting and perforation capability, as an independent company, with its primary focus on providing pipe cutting and perforating service to the oil and gas market, also the area in the globe that the Red Kite was present in is similar to the markets that Red Kite is initially focussing on.

FIND OUT MORE

Keep Up To Date

Interested in what's been happening at Red Kite? Here you can be the first to find out about what we've been getting up to, as well as industry news and other exciting stories within the world of oil & gas.

June 23, 2020
June 23, 2020
ISO Accreditation
We are now certified at ISO 9001:2015 standard.
CONTINUE READING
February 9, 2020
February 9, 2020
A First in the World
We've recently been involved in a first of it's kind pipe cut.
CONTINUE READING
February 7, 2020
February 7, 2020
A Successful First Year in Business
Find out more about Red Kite's first year of trading.
CONTINUE READING

Join Our Mailing List

Keep informed with Red Kite via our regular updates. Join our mailing list for lots of exciting information!

You can view our Privacy Policy here.

Thank you! You have now joined our mailing list.
Oops! Something went wrong while submitting the form.

Request a call

If you have a question about any of the services or products we offer then we would love to hear from you. Request a call now and we'll be in touch at a time convenient for you.

REQUEST A CALL